Publications

2024

Carmi, M.O., Cooley, S. and Pellegrino, S. 2024. Effects of varying geometric design parameters on the stability of deployable thin-shell composite space structures. AIAA 2024 SciTech Forum. AIAA 2024-0606. https://arc.aiaa.org/doi/10.2514/6.2024-0606 (pdf)

Dassanayake, S.P., Suh, J.-E., Thomson, M. and Pellegrino, S. 2024. Mass, volume and natural frequency scaling of deployable mesh reflectors. AIA 2024 SciTech Forum. AIAA 2024-2041. https://doi.org/10.2514/6.2024-2041 (pdf)

Haraszti, A., Reddy, N.H. and Pellegrino, S. 2024. Dynamic deployment of foldable composite structures with pre-tensioned springs. AIAA 2024 SciTech Forum., AIAA 2024-1842. DOI: https://arc.aiaa.org/doi/10.2514/6.2024-1842 (pdf)

Mizrahi, O., Fikes, A., Truong, A., Wiesemüller, F., Pellegrino, S. and Hajimiri, A. 2024. Popup arrays for large space-borne apertures. IEEE Transactions on Antennas & Propagation. https://doi.org/10.1109/TAP.2024.3414593

Palmeri, F., Laurenzi, S.  and Pellegrino, S. 2024. Root boundary conditions for omega deployable booms. AIAA 2024 SciTech Forum. AIAA 2024-0849. https://arc.aiaa.org/doi/10.2514/6.2024-0849 (pdf)

Pederson, J.M. and Pellegrino, S. 2024. Thermal Deformation of Ultrathin Composite Structures in a Vacuum Environment. AIAA 2024 SciTech Forum. AIAA 2024-0412. https://doi.org/10.2514/6.2024-0412 (pdf)

Pedivellano, A., and Pellegrino, S. 2024. Folding kinematics of kirigami-inspired space structures. International Journal of Solids and Structures, 300, 112865 https://doi.org/10.1016/j.ijsolstr.2024.112865 (pdf)

Suh, J.-E., Dassanayake, S.P., Thomson, M. and Pellegrino, S. 2024. Scaling laws for deployable mesh reflector antennas. AIAA Journal. (pdf)

Suh, J.-E., Dassanayake, S.P., Thomson, M. and Pellegrino, S. 2024. Scalable concept for reflector antenna assembled in space. AIAA 2024 SciTech Forum. AIAA 2024-0823. https://arc.aiaa.org/doi/10.2514/6.2024-0823 (pdf)

Ubamanyu, U.K., and Pellegrino, S. 2024. Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates. Mechanics of Time-Dependent Materials. https://doi.org/10.1007/s11043-024-09714-3 (pdf)

Wen, A. and Pellegrino, S. 2024. Performance and scaling metrics for launch vibration of coiled space structures with embedded friction damping. AIAA 2024 SciTech Forum. AIAA 2024-2438. https://doi.org/10.2514/6.2024-2438 (pdf)

2023

Aller, B., Pellegrino, S., Kinkaid, N., Mejia-Ariza, J., Otis, R., Chan, P. H. M. and Pena, F. (2023). Strain measurement in coilable thin composite shells with embedded Fiber Bragg Grating sensors.  AIAA 2023 SciTech Forum. AIAA-2023-2399 https://doi.org/10.2514/6.2023-2399 (pdf).

Canales, F.G. and Pellegrino, S. 2023. Rigorous analysis of energy conservation during dynamic deployment of elastic thin-shell structures. Journal of Applied Mechanics JAM-23-1283. https://doi.org/10.1115/1.4063220

Dorn, C. and Pellegrino, S. 2023. Multi-configuration rigidity: theory for statically determinate structures. International Journal of Solids and Structures, 284, 112502. https://doi.org/10.1016/j.ijsolstr.2023.112502

Hasanyan, A. D. and Pellegrino, S. (2023).  Modeling of damage in coilable composite shell structures.  AIAA 2023 SciTech Forum, 2023. AIAA-2023-0364 https://doi.org/10.2514/6.2023-0364 (pdf).

Luo, W. and Pellegrino, S. (2023).  Buckling analysis of a ladder deployable structure supporting a prestressed film.  AIAA 2023 SciTech Forum. AIAA-2023-0366 https://doi.org/10.2514/6.2023-0366 .

Marshall, M. and Pellegrino, S. (2023).  Slew maneuver constraints for agile flexible spacecraft.  Journal of Guidance, Control and Dynamics. 10.2514/G007430 (pdf).

Pederson, J., Haraszti, A. and Pellegrino, S. (2023).  Thermoelastic deformation of thin-shell deployable booms.  AIAA 2023 SciTech Forum. AIAA-2023-1506 https://doi.org/10.2514/6.2023-1506 (pdf).

Reddy, H. N. and Pellegrino, S. (2023).  Dynamics of the Caltech SSPP deployable structures: structures-mechanism interaction and deployment envelope.  AIAA 2023 SciTech Forum. AIAA-2023-2065 https://doi.org/10.2514/6.2023-2065 (pdf).

Royer, F. & Pellegrino, S. 2023 Experimentally probing the stability of thin-shell space structures under pure bending. Philosophical Transactions A of the Royal Society, 381, 20220024. https://doi.org/10.1098/rsta.2022.0024

Suh, J.-E., Dassanayake, S., Thomson, M. and Pellegrino, S. 2023. Concept for in-space assembly of large reflector antennas. 41st Antenna Workshop ESTEC, Noordwijk, The Netherlands, European Space Agency.

Ubamanyu, U. K. and Pellegrino, S. (2023).  Nonlinear behavior of IM7 carbon fibers in compression leads to bending nonlinearity of high-strain composites.  AIAA 2023 SciTech Forum. AIAA-2023-0580 https://doi.org/10.2514/6.2023-0580 (pdf).  

Wen, A. and Pellegrino, S. (2023).  Launch vibration damping using slip in pretensioned coils.  AIAA 2023 SciTech Forum. AIAA-2023-2066 https://doi.org/10.2514/6.2023-2066 (pdf).

2022

Aller, B., Pellegrino, S., Kinkaid, N., Mejia-Ariza, J., Otis, R., Chan, P. H. M. and Pena, F. (2022). Health monitoring of high strain composites using embedded Fiber Bragg Grating sensors. AIAA 2022 SciTech Forum. AIAA-2022-1622, DOI: 10.2514/6.2022-1622 (pdf).

Arya, M., Hodges, R.E., Sauder, J., Horst, S., Mobrem, M., Pedivellano, A., Wen, A., Truong, A. and Pellegrino, S. (2022). Lightweight composite reflectarray that can be flattened, folded, and coiled for compact stowage. AIAA 2022 Scitech Forum, AIAA-2022-1886, DOI: 10.2514/6.2022-1886 (pdf).

Brophy, J., Pellegrino, S., and Lubin, P., editors, (2022) Non-Nuclear Exploration of the Solar System. Final Workshop Report for the W.M. Keck Institute for Space Studies, Pasadena, CA. DOI:10.7907/h62p-6328 (pdf).

Canales, F.G. and Pellegrino, S. (2022). High-fidelity simulations of thin-shell deployable structures with adaptive meshing. AIAA 2022 SciTech Forum, AIAA 2022-1269, DOI: 10.2514/6.2022-1269 (pdf).

Dorn, C., Lang, R.J. and Pellegrino, S. (2022). Kirigami tiled surfaces with multiple configurations. Proceedings of the Royal Society Part A 478: 20220405, https://dx.doi.org/10.1098/rspa.2022.0405. (pdf)

Fikes, A., Gdotous, E., Kelzenberg, M., Ayling, A., Mizrahi, O., Sauder, J., Sommer, C.F., Truong, A., Wen, A., Wu, A., Madonna, R., Atwater, H., Hajimiri, A. and Pellegrino, S. (2022). The Caltech Space Solar Power Demonstration One Mission, 2022 IEEE International Conference on Wireless for Space and Extreme Environments (WiSEE), IEEE. DOI/10.1109/WiSEE49342.2022.9926883 (pdf).

Gdoutos, E.E., Sommer, C.F., Truong, A., Wen, A., Pedivellano, A., Ubamanyu, K., Madonna, R. and Pellegrino, S. (2022). Development of the Deployable on-Orbit ultraLight Composite Experiment (DOLCE) for the space solar power project demonstration mission. AIAA SciTech Forum. January 3, 2022, San Diego, CA. AIAA 2022-1266, DOI: 10.2514/6.2022-1266 (pdf).

Lee, A. J. and Pellegrino, S.  (2022). Mass efficiency of strip-based coilable space structures.M International Journal of Solids and Structures 254-255: 111867 (pdf).
https://doi.org/10.1016/j.ijsolstr.2022.111867.

Luo, W. and Pellegrino, S.  (2022). Formation and propagation of buckles in coilable thin shells with a thickness discontinuity. International Journal of Solids and Structures , 259,112010 (pdf).

Luo, W. and Pellegrino, S.  (2022). Propagating instabilities in coilable booms. AIAA 2022 SciTech Forum. DOI/10.2514/6.2022-0407 (pdf).

Marshall, M.A., Madonna, R.G. and Pellegrino, S. (2022). Investigation of equatorial medium earth orbits for space solar power. IEEE Transactions on Aerospace and Electronic Systems 58(3): 1574-1592. DOI: 10.1109/TAES.2021.3122790.

Pedivellano, A. and Pellegrino, S. (2022). Deployment dynamics of thin-shell space structures. Journal of Spacecraft and Rockets 59(4): 1214-1227. doi/abs/10.2514/1.A35172 (pdf).

Royer, F., Hutchinson, J.W. and Pellegrino, S. (2022). Probing the stability of thin-shell space structures under bending. International Journal of Solids and Structures 257: 111806 (pdf).
https://doi.org/10.1016/j.ijsolstr.2022.111806.

Royer, F. and Pellegrino, S. (2022). Experimentally probing the stability of thin-shell space structures under pure bending. Accepted for publication in Philosophical Transactions A of the Royal Society (pdf).
https://doi.org/10.1016/j.ijsolstr.2022.111806.

Royer, F. and Pellegrino, S. (2022). Probing the stability of ladder-type coilable space structures. AIAA Journal 60(4): 2000-2012. doi/abs/10.2514/1.J060820 (pdf).

Talon, T. and Pellegrino, S. (2022). Inextensible surface reconstruction under small relative deformations from distributed angle measurements. International Journal of Computer Vision, 130: 594–614. DOI/10.1007/s11263-021-01552-x (pdf).

Ubamanyu, K. and Pellegrino, S. (2022). Micromechanics modeling of time-dependent failure of stowed high-strain composite structures. AIAA 2022 Scitech Forum, AIAA-2022-0649. DOI/10.2514/6.2022-0649 (pdf).

Wen, A. and Pellegrino, S. (2022). Launch vibration of pre-tensioned coiled structures. AIAA 2022 SciTech Forum, AIAA-2022-1883, DOI/10.2514/6.2022-1883. (pdf).

2021

Dorn, C., Li, Y. Pellegrino, S. (2021), Structures with multiple equilibrium configurations due to prestress and unilateral contacts. IDETC/CIE2021 (pdf).

Ferraro, S. and Pellegrino, S. (2021). Size effects in plain-weave Astroquartz deployable thin shells. Journal of Composite Materials 55, 2417-2430 (pdf).

Ferraro, S. and Pellegrino, S. 2021. Topology and shape optimization of ultrathin composite self-deployable shell structures with cutouts. AIAA Journal 59(9): 3696-3709. (pdf)

Fikes, A., Mizrahi, O.S., Truong, A., Wiesemuller, F., Pellegrino, S. and Hajimiri, A. (2021). Fully collapsible lightweight dipole antennas, 2021 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (APS/URSI), Singapore. (pdf).

Lee, A.J. and Pellegrino, S. (2021). Cable-stayed architectures for large deployable spacecraft. SciTech 2021, AIAA (pdf).

Marshall, M.A. and Pellegrino, S. (2021). Reduced-order modeling for flexible spacecraft deployment and dynamics. SciTech 2021, AIAA (pdf).

Pedivellano, A. and Pellegrino, S. (2021). Deployment dynamics of foldable thin shell space structures. SciTech 2021, AIAA (pdf).

Reddy, N.H. and Pellegrino, S. (2021). Time-efficient geometrically non-linear finite element simulations of thin shell deployable structures. SciTech 2021, AIAA (pdf).

Talon, T., Chen, Y.L., and Pellegrino, S. (2021). Shape reconstruction of planar flexible spacecraft structures using distributed sun sensors. Acta Astronautica 180: 328-339 (pdf).

Williams, D. E., Dorn, C., Pellegrino, S. and Hajimiri, A. (2021). Origami-inspired shape-changing phased Array. 50th European Microwave Conference (EuMC) IEEE, pp. 344-347 (pdf).

2020

Gdoutos, E. E., Truong, A., Pedivellano, A., Royer, F., and Pellegrino, S. (2020). Ultralight Deployable Space Structure Prototype. SciTech 2020, Orlando (FL), AIAA-2020-0692 (pdf).

Hasanyan, A. D. and Pellegrino, S. (2020). Characterization of interface toughness in thin-ply composites. SciTech 2020, Orlando (FL), AIAA-2020-0694 (pdf).

Leclerc, C. and Pellegrino, S. (2020). Nonlinear buckling of ultra-thin composite booms. International Journal for Solids and Structures 203: 46-56 (pdf).

Li, Y. and Pellegrino, S. (2020). A theory for the design of multi-stable morphing structures. Journal of the Mechanics and Physics of Solids 136(March): 103772 (pdf).

Marshall, M., Goel, A., and Pellegrino, S. (2020). Power-optimal guidance for planar space solar power satellites. Journal of Guidance, Control and Dynamics 43(3): 518-535 (pdf).

Miura, K. and Pellegrino, S. (2020). Forms and Concepts for Lightweight Structures. Cambridge University Press.

Pedivellano, A., Gdoutos, E.E., and Pellegrino, S. (2020). Sequentially controlled dynamic deployment of ultra-thin shell structures. SciTech 2020, Orlando (FL), AIAA-2020-0690 (pdf).

Royer, F. and Pellegrino, S. (2020). Buckling of ultralight ladder-type coilable space structures. SciTech 2020, Orlando (FL), AIAA-2020-1437 (pdf).

Ubamanyu, K., Hasanyan, A. D., and Pellegrino, S. (2020). Experimental study of time-dependent failure of high strain composites. SciTech 2020, Orlando (FL), AIAA-2020-0207 (pdf).

Warmann, E.C., Espinet-Gonzales, P., Vaidya, N., Loke, S., Naqavi, A., Vinogradova, T., Kelzenberg, M., Leclerc, C., Gdoutos, E., Pellegrino, S., and Atwater, H.A. (2020). An Ultralight Concentrator Photovoltaic System for Space Solar Power Harvesting. Acta Astronautica 170: 443-451(pdf).

Wilson, L., Gdoutos, E., and Pellegrino, S. (2020). Tension-stabilized coiling of isotropic tape springs. International Journal of Solids and Structures 188-189: 103-17 (pdf).

2019

Arya, M., Sauder, F., Hodges, R.E. and Pellegrino, S. (2019). Large-area deployable reflectarray antenna for cubesats. SciTech 2019, San Diego (CA), AIAA-2019-2257 (pdf).

Ferraro, S. and  Pellegrino, S. (2019). Topology optimization of composite self-deployable shells with cutouts. SciTech 2019, San Diego (CA), AIAA-2019-1524 (pdf).   

Gdoutos, E., Leclerc, C., Royer, F., Turk, D.A., and Pellegrino, S. (2019). Ultralight spacecraft structure prototype. SciTech 2019, San Diego (CA), AIAA-2019-1749 (pdf).   

Hashemi, M. R. M., Fikes, A.C., Gal-Katziri, M., Abiri, B., Bohn, F., Safaripour, A., Kelzenberg, M.D., Warmann, E.L., Espinet, P., Vaidya, N., Gdoutos, E., Leclerc, C., Royer, F., Pellegrino, S., Atwater, H.A., Hajimiri, A. (2019). A flexible phased array system with low areal mass density. Nature Electronics 2(May): 195-205 (pdf)

Leclerc, C. and Pellegrino, S. (2019). Reducing stress concentration in the transition region of coilable ultra-thin-shell booms. SciTech 2019, San Diego (CA), AIAA-2019-1522 (pdf).

Marshall, M., Goel, A., and Pellegrino , S.(2019). Attitude maneuver design for planar space solar power satellite. 29th AAS/AIAA Space Flight Mechanics Meeting. Kaanapali, HI (pdf).

Pedivellano, A. and Pellegrino, S. (2019). Stability analysis of coiled tape springs. SciTech 2019, San Diego (CA), AIAA-2019-1523 (pdf).   

Sader, J., Delapierre, M., and Pellegrino, S.  (2019). Shear-induced buckling of a thin elastic disk undergoing spin-up. International Journal of Solids and Structures 166: 75-82 (pdf).

Sakovsky, M. and Pellegrino, S. (2019). Closed cross-section dual matrix composite hinges for deployable structures. Composite Structures 208: 784-795 (pdf).        

Turk, D.-A. and Pellegrino, S. (2019). Parametric design of conforming joints for thin-shell coilable structures. SciTech 2019, San Diego (CA), AIAA-2019-1259 (pdf).      

2018

Bessa, M. and Pellegrino, S. (2018). Design of ultra-thin shell structures in the stochastic post-buckling range using Bayesian machine learning and optimization. International Journal of Solids and Structures: doi: 10.1016/j.ijsolstr.2018.01.035 (pdf).

Bosi, F. and Pellegrino, S. (2018). Nonlinear thermomechanical response and constitutive modeling of viscoelastic polyethylene membranes. Mechanics of Materials: 117: 9-21: doi: 10.1016/j.mechmat.2017.10.004 (pdf).

Bosi, F., Schlothauer, A., Leclerc, C., and Pellegrino, S. (2018). Cure-induced deformation of ultra-thin composite laminates. SciTech 2018. Orlando, FL, AIAA-2018-2241 (pdf).

Delapierre, M., Chakraborty, D., Sader J., and Pellegrino, S. (2018). Wrinkling of Transversely Loaded Spinning Membranes. International Journal of Solids and Structures: doi: 10.1016/j.ijsolstr.2018.01.031 (pdf).

Delapierre, M., Haegeli Lohaus, S., and Pellegrino, S.  (2018). Nonlinear vibration of transversely-loaded spinning membranes. Journal of Sound and Vibration 427: 41-62.

Ferraro, S. and Pellegrino, S. (2018). Self-deployable joints for ultra-light space structures. SciTech 2018. Orlando (FL), AIAA-2018-0694 (pdf).

Gdoutos, E., Leclerc, C., Royer, F., Kelzenberg, M.D. , Warmann, E.C. , Espinet-Gonzales, P., Vaidya, N., Bohn, F., Abiri, F., Hashemi, M.R. , Gal-Katziri, M., Fikes, A., Atwater, H.,  Hajimiri, A.,  and Pellegrino, S. (2018). A lightweight tile structure integrating photovoltaic conversion and RF power transfer for space solar power applications. SciTech 2018. Orlando (FL), AIAA-2018-2022 (pdf).

Leclerc, C.,  Pedivellano, A. and  Pellegrino, S. (2018). Stress concentration and material failure during coiling of ultrathin TRAC booms. SciTech 2018. Orlando (FL), AIAA-2018-0690 (pdf).

Li, Y. and Pellegrino, S. (2018). Design of structures with multiple equilibrium configurations. IDETC/CIE 2018. August 26-29, 2018, Quebec City, Canada, ASME.

Ning, X. and  Pellegrino, S. (2018). Searching for Imperfection Insensitive Externally Pressurized Near-Spherical Thin Shells. Journal of the Mechanics and Physics of Solids 120: 49-67.

Royer, F. and Pellegrino, S. (2018). Ultralight ladder-type coilable space structures. SciTech 2018. Orlando (FL), AIAA-2018-1200 (pdf).

Talon, T. and Pellegrino, S. (2018). Shape measurement of large structures in space: experiments. 2018 IEEE International Workshop on Metrology for AeroSpace. Rome, June 20-22, 2018.

Underwood, C., Pellegrino, S., Priyadarshan, H., Simha, H., Bridges, C., Goel, A. , Talon, T. , Pedivellano, A., Leclerc, C., Wei, Y. , Royer, F., Ferraro, F. , Sakovsky, M., Marshall, M., Jackson, K., Sommer, C., Vaidhyanathan A., Sooraj, V.S. , Baker, J. (2018). AAReST Autonomous Assembly Reconfigurable Space Telescope Flight Demonstrator. 69th International Astronautical Congress (IAC). Bremen, Germany, 1-5 October 2018, IAC-18-A6.5.2.

Wei, Y. and Pellegrino, S. (2018). Phenomenological model for coupled multiaxial piezoelectricity. SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring (SS18), Published in SPIE Proceedings Vol. 10596:  Behavior and Mechanics of Multifunctional Materials and Composites XII, Denver, SPIE.

2017

Arya, M., Lee, N. and Pellegrino, S. (2017). Crease-free biaxial packaging of thick membranes with slipping folds. International Journal of Solids and Structure, 108: 24-39; doi 10.1016/j.ijsolstr.2016.08.013 (pdf).

Bessa, M. and Pellegrino, S. (2017). Design of ultra-thin composite deployable shell structures through machine learning.  Annette Bögle, Manfred Grohmann (eds.), IASS Annual Symposium 2017 “Interfaces: architecture . engineering . science”, Hamburg, Germany (pdf).

Bosi, F. and Pellegrino, S. (2017). Molecular based temperature and strain rate dependent yield criterion for anisotropic elastomeric thin films. Polymer: 125: 145-153: doi: 10.1016/j.polymer.2017.07.080 (pdf).

Goel, A., Lee, N. and Pellegrino, S. (2017). Trajectory design of formation flying constellation for space-based solar power. IEEE Aerospace Conference, Big Sky, MN (pdf).

Kwok, K. and Pellegrino, S. (2017). Micromechanics models for plain-weave composite tape springs. AIAA Journal: 1: 309-321: doi 10.2514/1.J055041 (pdf).

Leclerc, C., Wilson, L., Bessa, M., and Pellegrino, S. (2017). Characterization of ultra-thin composite triangular rollable and collapsible booms. SciTech 2017, Grapevine (TX), AIAA (pdf).

Leclerc, C. and Pellegrino, S.  (2017) Ultra-Thin Composite Deployable Booms Annette Bögle, Manfred Grohmann (eds.), IASS Annual Symposium 2017 “Interfaces: architecture . engineering . science”, Hamburg, Germany (pdf).

Ning, X. and Pellegrino, S. (2017). Experiments on imperfection insensitive axially loaded cylindrical shells. International Journal of Solids and Structures: 115-116: 73-86: doi: 10.1016/j.ijsolstr.2017.02.028 (pdf).

Sakovsky, M., Pellegrino, S. and Costantine, J. (2017). Rapid design of deployable antennas for CubeSats. IEEE Antennas and Propagation Magazine: April: 50-58: doi 10.1109/MAP.2017.265553 (pdf).

Steeves, J. and Pellegrino, S. (2017). Post-cure shape errors of ultra-thin symmetric CFRP laminates: effect of ply-level imperfections. Composite Structures; 167, 237-24, doi 10.1016/j.compstruct.2016.12.075 (pdf).

Talon, T., and Pellegrino, S. (2017). In-space shape measurement of large planar structures. SciTech 2017. Grapevine (TX), AIAA (pdf).

Umali, J., Wilson, L., and Pellegrino, S. (2017). Vibration response of ultralight coilable spacecraft structures. SciTech 2017. Grapevine (TX), AIAA (pdf).

Wei, Y., and Pellegrino, S. (2017). Modular foldable surfaces: a novel approach based on spatial mechanisms and thin shells. SciTech 2017. Grapevine (TX), AIAA (pdf).

Goel, A., Chung, S.-J., and Pellegrino, S. (2017). Trajectory design of a spacecraft formation for space-based solar power using sequential convex programming. 9th International Workshop on Satellite Constellations and Formation Flying (IWSCFF). Boulder, CO. IWSCFF 17-43 (pdf).

2016

Arya, M., Lee, N. and Pellegrino, S. (2016). Ultralight Structures for Space Solar Power Satellites. SciTech 2016, San Diego, AIAA-2016-1950 (pdf).

Brinkmeyer, A., Pellegrino, S. and Weaver, P.M.  (2016). Effects of long-term stowage on the deployment of bistable tape springs. Journal of Applied Mechanics 83(January): doi 011008-011001-011011 (pdf).

Costantine, Y. Tawk, Y., Maqueda, I., Olson, G.M., Sakovsky, M., Pellegrino, S., and Christodoulou, C.G.  (2016). UHF Deployable Helical Antennas for CubeSats.  IEEE Transactions on Antennas and Propagation, 64 (9): 3752-3759 (pdf).

Delapierre, M. and Pellegrino, S. (2016). Membrane spin up in a normal gravity field: experiments and simulations. SciTech 2016, San Diego, AIAA-2016-1216 (pdf).

Hogstrom, K. and Pellegrino, S. (2016). Methods for Characterizing the Reliability of Deployable Modules for Large Optical Reflectors. SciTech 2016, San Diego, AIAA-2016-2164 (pdf).

Jackson, K., Wallace, J.K. and Pellegrino, S. (2016). Co-phasing primary mirror segments of an optical space telescope using a long stroke Zernike WFS. Proc. SPIE 9904, Space Telescopes and Instrumentation 2016: Optical, Infrared, and Millimeter Wave, 99046D: 10.1117/12.2231736 (pdf).

Lee, N., Backes, P., Burdick, J., Pellegrino, S., Fuller, C., Hogstrom, K. , Kennedy, B., Kim, J., Mukherjee, R., Seubert, C., and Wu, Y.-H.  (2016). Architecture for in-space robotic assembly of a modular space telescope. Journal of Astronomical Telescopes, Instruments, and Systems, 2 (4): 041207, doi 10.1117/1.JATIS.2.4.041207 (pdf).

Li, J., Kwok, K., and Pellegrino, S. (2016). Thermoviscoelastic models for polyethylene thin films. Mechanics of Time-Dependent Materials 20: 13-43, doi 10.1007/s11043-015-9282-8 (pdf).

Ning, X. and Pellegrino, S. (2016). Bloch wave buckling analysis of axially loaded periodic cylindrical shells. Computers and Structures, 177: 114-125 (pdf).

Ota, N. S. N. , Wilson, L., Gay Neto, A., Pellegrino, S. and Pimenta, P. M (2016). Nonlinear dynamic analysis of creased shells. Finite Elements in Analysis and Design, 121: 64-74 (pdf).

Sakovsky, M., Pellegrino, S. and  Mallikarachchi, H.M.Y.C. (2016). Folding and deployment of closed cross-section dual-matrix composite booms. SciTech 2016, San Diego, AIAA-2016-0970 (pdf)

Sakovsky, M., Pellegrino, S. and Costantine, J. (2016) Rapid deployable antenna concept selection for CubeSats. 37th Antenna Workshop, 15-17 November 2016, ESA/ESTEC (pdf).

Steeves, J., Jackson, K., Pellegrino, S., Redding, D., Wallace, J.K., Bradford, S.C. and Barbee, T. (2016). Multilayer active shell mirrors for space telescopes. Proc. SPIE 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II: 99121K, 10.1117/12.2233594 (pdf).

2015

Arya, M., Lee, N., and Pellegrino, S. (2015). Wrapping thick membranes with slipping folds. 2nd AIAA Spacecraft Structures Conference, 5-8 January 2015, Kissimmee, FL. AIAA 2015-0682 (pdf).

Hegyi, D. and Pellegrino, S. (2015). Viscoplastic tearing of polyethylene thin film. Mechanics of Time-Dependent Materials (19): 187–208, 10.1007/s11043-015-9259-7(pdf).

Lee, N., Pellegrino, S, and Wu, Y.H. (2015). Design algorithm for the placement of identical segments in a large spherical mirror. Journal of Astronomical Telescopes, Instruments, and Systems 1(2): 024002. doi:10.1117/1.JATIS.1.2.024002 (pdf)

Ning, X. and Pellegrino, S. (2015). Imperfection-insensitive axially loaded thin cylindrical shells. International Journal of Solids and Structures. dx.doi.org/10.1016/j.ijsolstr.2014.12.030 (pdf)

Ning, X. and Pellegrino, S., Buckling Analysis of Axially Loaded Corrugated Cylindrical Shells. 56th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Jan. 5-9, 2015, Kissimmee, FL (pdf)

Pellegrino, S. (2015). Folding and deployment of thin shell structures. In: Extremely Deformable Structures (edited by D. Bigoni). Springer: 1-89. (pdf).

Sakovsky, M., Maqueda. I., Karl, C., Pellegrino, S., and Costantine, J. (2015). Dual-Matrix Composite Wideband Antenna Structures for CubeSats. AIAA Spacecraft Structures Conference, 5-9 January 2015, Kissimmee, FL, AIAA 2015-0944 (pdf).

Underwood, C., Pellegrino, S., Lappas, V.J., Bridges, C., and Baker, J. (2015). Using cubesat/micro-satellite technology to demonstrate the autonomous assembly of a reconfigurable space telescope (AAReST). Acta Astronautica 114(September–October): 112-122. doi:10.1016/j.actaastro.2015.04.008 (pdf)

Delapierre, M. and Pellegrino, S. (2015). Spin-stabilized membrane antenna structures, 2nd AIAA Spacecraft Structures Conference, 5-8 January 2015, Kissimmee, FL. AIAA 2015-1403 (pdf).

2014

Steeves, J., Laslandes, M., Pellegrino, S., Redding, D., Bradford, S. C., Wallace, J. K., Barbee, T. (2014) Design, fabrication and testing of active carbon shell mirrors for space telescope applications. SPIE Astronomical Telescopes and Instrumentation, 23-27 June 2014, Montreal, QC, 9151-4. (pdf)

Laslandes, M., Pellegrino, S., Steeves, J., Patterson, K. (2014) Optimization of electrode configuration in surface-parallel actuated deformable mirrors. SPIE Astronomical Telescopes and Instrumentation, 23-27 June 2014, Montreal, QC, 9151-4. (pdf)

Arya, M., and Pellegrino, S. (2014). Deployment mechanics of highly compacted thin membrane structures. AIAA Spacecraft Structures Conference, 13-17 January 2014, National Harbor, MD, AIAA 2014-1038.

Kobilarov, M., and Pellegrino, S. (2014). Trajectory planning for CubeSat proximity operations. Journal of Guidance, Control and Dynamics 37(issue 2):566-579.

Lee, N., and Pellegrino, S. (2014). Multi-layered membrane structures with curved creases for smooth packaging and deployment. AIAA Spacecraft Structures Conference, 13-17 January 2014, National Harbor, MD, AIAA 2014-1037.(pdf)

Liewer, P.C., Klesh, A.T., Lo, M.W., Murphy, N., Staehle, R.L., Angelopoulos, V., Anderson, B.D., Arya, M., Pellegrino, S., Cutler, J.W., Lightsey, E.G., and Vourlidas, A. (2014). A fractionated space weather base at L5 using CubeSats and solar sails. In: Advances in Solar Sailing (edited by: M. Macdonald), Springer Praxis Books, Springer-Verlag, Berlin Heidelberg, 259-268.

Mallikarachchi, H.M.Y.C., and Pellegrino, S. (2014) Design of ultrathin composite self-deployable booms. Accepted for publication in Journal of Spacecraft and Rockets.

Mallikarachchi, H.M.Y.C., and Pellegrino, S. (2014). Deployment dynamics of ultrathin composite booms with tape-spring hinges. Journal of Spacecraft and Rockets 51(2): 604-613.

Saito, K., Pellegrino, S., and Nojima, T. (2014). Manufacture of arbitrary cross-section composite honeycomb cores based on origami techniques. ASME Journal of Mechanical Design 136(May): 051011-051011.

2013

Brinkmeyer, A., Pellegrino, S., Weaver, P. M., and Santer, M. (2013). Effects of viscoelasticity on the deployment of bistable tape springs. 19th International Conference on Composite Materials. July 28-August 2, 2013, Montreal.(pdf)

Kwok, K., and Pellegrino, S. (2013). Folding, stowage and deployment of viscoelastic tape springs. AIAA Journal 51(8): 1908-1918. (pdf)

Lopez Jimenez, F., and Pellegrino, S. (2013). Failure of carbon fibers at a crease in a fiber-reinforced silicone sheet. Journal of Applied Mechanics 80(January): 011020-011021-011028.(pdf)

Mallikarachchi, H. M. Y. C., and Pellegrino, S. (2013). Failure criterion for two-ply plain-weave CFRP laminates. Journal of Composite Materials 47(11): 1357-1375.(pdf)

Ning, X., and Pellegrino, S. (2013). Imperfection-Insensitive Axially Loaded Cylindrical Shells. 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 8-11 April 2013, Boston, MA, AIAA-2013-1768. (pdf)

Norton, C. D., Pellegrino, S. and Johnson, M. (2013). Findings of the KECK Institute for Space Studies Program on Small Satellites: A Revolution in Space Science. Small Satellite Conference. Logan, UT. (pdf)

Olson, G. M., Pellegrino, S., Banik, J., and Costantine, J. (2013). Deployable helical antennas for cubesats. 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 8-11 April 2013, Boston, MA, AIAA-2013-1670. (pdf)

Patterson, K., and Pellegrino, S. (2013). Ultra-lightweight deformable mirrors. Applied Optics 52(22): 5327-5341.(pdf)

Saito, K., Pellegrino, S., and T. Nojima (2013). Manufacture of arbitrary cross-section composite honeycomb cores based on origami techniques. ASME 2013 IDETC/CIE 2013. August 4-7, 2013 Portland OR, ASME. (pdf)

Steeves, J. and Pellegrino, S. (2013). Ultra-thin highly deformable composite mirrors. 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 8-11 April 2013, Boston, MA, AIAA-2013-1523.(pdf)

Wilson, L., Pellegrino, S., and Danner, R. (2013). Origami sunshield concepts for space telescopes. 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 8-11 April 2013, Boston, MA, AIAA-2013-1594. (pdf)

2012

Deng, X., and Pellegrino, S. (2012) Wrinkling of orthotropic viscoelastic membranes. AIAA Journal, 50(3), 668-681. (pdf)

Kwok, K., & Pellegrino, S. (2012). Micromechanical modeling of deployment and shape recovery of thin-walled viscoelastic composite space structures. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii. (pdf)

Lopez Jimenez, F., Pellegrino, S. (2012) Constitutive modeling of fiber composites with a soft hyperelastic matrix. International Journal of Solids and Structures, 49, February 2012(3-4), 635-647.(pdf)

Lopez Jimenez, F., Pellegrino, S. (2012) Folding of fiber composites with a hyperelastic matrix. International Journal of Solids and Structures, 49, February 2012(3-4), 395-407. (pdf)

Maqueda, I., Pellegrino, S., and Mejia-Ariza, J. (2012). Characterization of a high strain composite material. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii. (pdf)

Ning, X., and Pellegrino, S. (2012). Design of lightweight structural components for direct digital manufacturing. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii. (pdf)

Olson, G. M., Pellegrino, S., Costantine, J., & Banik, J. (2012). Structural architectures for a deployable wideband UHF antenna. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii. (pdf)

Patterson, K., Yamamoto, N., & Pellegrino, S. (2012). Thin deformable mirrors fora reconfigurable space aperture. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii. (pdf)

Tan, L. T. and Pellegrino, S. (2012) Thin-shell deployable reflectors with collapsible stiffeners: experiments and simulations. AIAA Journal, 50(3), 659-667. (pdf)

2011

Deng, X., and Pellegrino, S., (2011) A technique to predict clefting of lobed super-pressure balloons. 11th AIAA ATIO Conference, 20-22 September, Virginia Beach, AIAA-2011-6830. (pdf)

Guest, S. D., Kebadze, E., and Pellegrino, S., (2011) A zero-stiffness elastic shell structure. Journal of Mechanics of Materials and Structures 6, 203-212. (pdf)

Kwok, K., and Pellegrino, S., (2011) Large strain viscoelastic model for balloon film. 11th AIAA ATIO Conference, 20-22 September, Virginia Beach, AIAA-2011-6939. (pdf)

Mallikarachchi, H. M. Y. C. and Pellegrino, S. (2011). Design and validation of thin-walled composite deployable booms with tape-spring hinges. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-7 April 2011, Denver, CO, AIAA 2011-2019. (pdf)

Mallikarachchi, H. M. Y. C. and Pellegrino, S. (2011). Quasi-static folding and deployment of ultra-thin composite structures. Journal of Spacecraft and Rockets, 48(1), 187-198.(pdf)

Kwok, K. and Pellegrino, S. (2011). Viscoelastic effects in tape springs. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-7 April 2011, Denver, CO, AIAA 2011-2022.(pdf)

Patterson, K. and Pellegrino, S. (2011). Shape correction of thin mirrors. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-7 April 2011, Denver, CO, AIAA 2011-1827.(pdf)

Santer, M., and Pellegrino, S., (2011) Concept and design of a multistable plate structure. ASME Journal of Mechanical Design, 133(8}. (pdf)

Stohlman, O. R. and Pellegrino, S. (2011). Effects of component properties on the accuracy of a joint-dominated deployable mast. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-7 April 2011, Denver, CO, AIAA 2011-2163. (pdf)

Underwood, C., and Pellegrino, S., (2011)Autonomous assembly of a reconfigurable space telescope (AAReST) for astronomy and earth observation. 8th IAA Symposium on Small Satellites for Earth Observation, April 4-8, 2011 Berlin, 2011. (pdf)

2010

Deng, X., and Pellegrino, S. (2010) Shape of Super-Pressure Balloons. In Spatial Structures: Temporary and Permanent (edited by: Q. Zhang, L. Yang, Y. Hu), China Architecture and Building Press, Shanghai.

Deng, X., and Pellegrino, S. (2010) Wrinkling of orthotropic viscoelastic membranes. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 12-15 April 2010, Orlando, FL, AIAA-2010-2670. (pdf)

Kwok, K., and Pellegrino, S. (2010) Shape recovery of viscoelastic deployable structures. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 12-15 April 2010, Orlando, FL, AIAA-2010-2606. (pdf)

Mallikarachchi, H. M. Y. C., and Pellegrino, S. (2010) Optimized designs of composite booms with integral tape-spring hinges. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 12-15 April 2010, Orlando, FL, AIAA-2010-2750.(pdf)

Pagitz, M., and Pellegrino, S. (2010). Maximally stable lobed balloons. International Journal of Solids and Structures, 47, 1496-1507.(pdf)

Patterson, K., Pellegrino, S. and Breckinridge, J. (2010). Shape correction of thin mirrors in a reconfigurable modular space telescope. SPIE Astronomical Instrumentation, San Diego, 2010, SPIE Conf. 7731-72 (pdf)

Stohlman, O. R., and Pellegrino, S. (2010) Shape accuracy of a joint-dominated deployable mast. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 12-15 April 2010, Orlando, FL, AIAA-2010-2605. (pdf)

Winslow, P., Pellegrino, S., and Sharma, S. B. (2010). Multi-objective optimization of free-form grid structures. Structural and Multidisciplinary Optimization, 40, 257-269. (pdf)

2009

Deng, X., and Pellegrino, S. (2009) Finite element simulations of clefting in lobed super-pressure balloons. AIAA Balloon Systems Conference. 4-7 May 2009, Seattle, WA, AIAA-2009-2816.

Gerngross, T., and Pellegrino, S. (2009) Anisotropic viscoelasticity and wrinkling of superpressure balloons: simulation and experimental verification. AIAA Balloon Systems Conference, 4-7 May 2009, Seattle, WA, AIAA-2009-2815. (pdf)

Lopez Jimenez, F. and Pellegrino, S. (2009) Folding of thin-walled composite structures with a soft matrix. 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 4-7 May 2009, Palm Springs, CA, AIAA-2009-2633.(pdf)

Mallikarachchi, H.M.Y.C. and Pellegrino, S. (2009) Deployment dynamics of composite booms with integral slotted hinges. 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 4-7 May 2009, Palm Springs, CA, AIAA-2009-2631. (pdf)

Mallikarachchi, H.M.Y.C., and Pellegrino, S. (2009) Folding and deployment of ultra-thin composite structures. Proceedings of International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, Institute of Constructions, Special Systems and Engineering Maintenance of the Georgian Technical University, pp. 48-57, 14-16 October 2009, Tbilisi, Georgia. (pdf)

Quadrelli, M.B., Boussalis, D., Davis, G., Kwok, K., and Pellegrino, S. (2009) Structural and control concepts for variable geometry planetary entry systems. 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-7 May 2009, Palm Springs, CA, AIAA-2009-2100. (pdf)

Santer, M. and Pellegrino, S. (2009) Topological optimization of compliant adaptive wing structure. AIAA Journal, Vol 47, No. 3, 523-534.(pdf)

2008

Deng, X., and Pellegrino, S. (2008) Computation of partially inflated shapes of stratospheric balloon structures. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 7-10 April 2008, Schaumburg, Illinois, AIAA-2008-2133. (pdf)

Gerngross, T., Xu, Y. and Pellegrino, S. (2008) Viscoelastic behaviour of pumpkin balloons. Advances in Space Research 42(10), 1683-1690.(pdf)

Howard, P., Watt, A.M., and Pellegrino, S. (2008). Deployable support structure. UK Patent, UK-GB0316734.3; European Patent EP03254474.4; World Patent WO2055/1011056.

Mallikarachchi, H.M.Y.C., and Pellegrino, S. (2008) Simulation of quasi-static folding and deployment of ultra-thin composite structures. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 7-10 April 2008, Schaumburg, Illinois, AIAA-2008-2053. (pdf)

Papa, A. and Pellegrino, S. (2008). Systematically creased thin-film membrane structures. Journal of Spacecraft and Rockets 45(1), 10-18.

Santer, M. and Pellegrino, S., (2008) Compliant multistable structural elements. International Journal of Solids Structures, 45, 6190-6204. (pdf)

Schioler, T. and Pellegrino, S. (2008). A bistable structural element. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 222(C11), 2045-2051.

Soykasap, O., Pellegrino, S., Howard, P., and Notter, M. (2008). Folding large antenna tape spring. Journal of Spacecraft and Rockets 45(3), 560-567.

Tan, G. E. B. and Pellegrino, S. (2008). Nonlinear vibration of cable-stiffened pantographic deployable structures. Journal of Sound and Vibration 314, 783-802.

Winslow, P., Sharma, S.B., and Pellegrino, S. (2008) Multi-objective optimization of free-form grid structures. EngOpt 2008 - International Conference on Engineering Optimization. 1-5 June 2008, Rio de Janeiro, Brazil.(pdf)

Winslow, P., Sharma, S.B., and Pellegrino, S. (2008) Subdivision techniques for optimization of free-form structures. In J.G. Oliva-Salinas, editor, IASS Symposium 2008. Acapulco, Mexico.

Winslow, P., Pellegrino, S. (2008). Mapping two-way grids onto free-form surfaces. Journal of the International Association for Shell and Spatial Structures, 49(2).

Winslow, P. and Pellegrino, S. (2008). Free form grid structures. The Structural Engineer, 86, 19-20 (pdf).

2007

Gerngross, T., and Pellegrino, S. (2007), Implementation and validation of Schapery-Rand anisotropic viscoelasticity model for super-pressure balloons. AIAA Balloon Systems Conference, 21-24 May, 2007, Williamsburg, VA, AIAA-2007-2632. (pdf)

Gerngross, T. and Pellegrino, S. (2007). Modelling of anisotropic viscoelastic behaviour in super-pressure balloons. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2007, Honolulu, Hawaii, AIAA-2007-1808. (pdf)

Karni, E. and Pellegrino, S. (2007). A retractable small-span roof based on thin-walled lightweight spatial units. International Journal of Space Structures, 22(2), 93-106.

Kueh, A. and Pellegrino, S. (2007). ABD matrix of single-ply triaxial weave fabric composites. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2007, Honolulu, Hawaii, AIAA-2007-2161. (pdf)

Kueh, A. B. H. and Pellegrino, S. (2007). Triaxial weave fabric composites. Department of Engineering, University of Cambridge. Report CUED/D-STRUCT/TR223.

Pagitz, M., and Pellegrino, S. (2007), Shape optimization of pumpkin balloons. AIAA Balloon Systems Conference, 21-24 May, 2007, Williamsburg, VA, AIAA-2007-2606. (pdf)

Pagitz, M. and Pellegrino, S. (2007). Buckling pressure of pumpkin balloons. International Journal of Solids and Structures, 44, 6963-6986.

Santer, M. J. and Pellegrino, S. (2007). Implementation of load-path topology optimisation in Samcef for the generation of compliant structures. 10th Samtech Users' Conference, 13-14 March 2007, Liege, Belgium. (pdf)

Santer, M. J. and Pellegrino, S. (2007). Topology optimization of adaptive compliant aircraft wing leading edge. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2007, Honolulu, Hawaii, AIAA-2007-1712. (pdf)

Schioler, T., and Pellegrino, S. (2007). Space frames with multiple stable configurations. AIAA Journal 45(7), 1740-1747. (pdf)

Winslow, P., Pellegrino, S., and Sharma, S.B. (2007). Mapping two-way grids onto free-form surfaces. IASS Symposium 2007, 3-6 December 2007, Venice, 2007. (pdf)

2006

Gan, W. W., and Pellegrino, S. (2006). A numerical approach to the kinematic analysis of deployable structures forming a closed loop. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 220, 1045-1056.(pdf)

Guest, S. D., and Pellegrino, S. (2006). Analytical models for bistable cylindrical shells. Proceedings of the Royal Society A, 462(3), 839-854. (pdf)

Howard, P., Notter, M., Hall, C.D., and Pellegrino, S. (2006). A space based radar antenna concept for global biomass measurement. RF Sensors Conference, Estec, ESA.

Howard, P., Notter, M., Hall, C.D., and Pellegrino, S. (2006). A space based radar antenna concept to counter camouflage and concealment. NATO RTO Specialists' Meeting "Emerging and Future Technologies for Space-Based Operations Support to NATO Military Operations", 6-7 September 2006, Bucharest, Romania.

Kueh, A., and Pellegrino, S. (2006). Thermo-elastic behaviour of single ply triaxial woven fabric composites. 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1-4 May 2006, Newport, RI, AIAA-2006-1899.

Pagitz, M., and Pellegrino, S. (2006). Computation of buckling pressure of pumpkin balloons. 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1-4 May 2006, Newport, RI, AIAA-2006-1803. (pdf)

Pagitz, M., Xu, Y., and Pellegrino, S. (2006). Stability of lobed balloons. Advances in Space Research 37, 2059-2069.

Pellegrino, S. (2006). New concepts for spacecraft antennas and radar structures based on ultra-thin composites. 46th Israel Annual Conference on Aerospace Sciences, Tel Aviv and Haifa. (pdf)

Soykasap, O., Pellegrino, S., Howard, P., and Notter, M. (2006). Tape spring large deployable antenna. 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1-4 May 2006, Newport, RI, AIAA-2006-1601. (pdf)

Tan, L. T., and Pellegrino, S. (2006).Thin-shell deployable reflectors with collapsible stiffeners: Part 1 Approach. AIAA Journal, 44(11), 2515-2523.(pdf)

Wong, Y. W., and Pellegrino, S. (2006). Wrinkled membranes. Part I: experiments. Journal of Mechanics of Materials and Structures, 1(1), 1-23. (pdf)

Wong, Y. W., and Pellegrino, S. (2006). Wrinkled membranes. Part II: analytical models. Journal of Mechanics of Materials and Structures, 1(1), 25-59. (pdf)

Wong, Y. W., and Pellegrino, S. (2006). Wrinkled membranes. Part III: numerical simulations. Journal of Mechanics of Materials and Structures, 1(1), 61-93. (pdf)

2005

Datashvili, L., Lang, M., Nathrath, N., Zauner, Ch., Baier, H., Soykasap, O., Tan, L.T., Kueh, A., Pellegrino, S., Fasold, D. (2005). Technical assessment of high accuracy large space borne antenna. Munich, Technical University Munich, pp. 146.

Datashvili, L., Nathrath, N., Lang, M., Baier, H., Fasold, D., Pellegrino, S., Soykasap, O., Kueh, A., Tan, L. T., Mangenot, C., and Santiago-Prowald, S. (2005). New concepts and reflecting materials for space borne large deployable reflector antennas. In: 28th ESA Antenna Workshop on Space Antenna Systems and Technologies (edited by: N.Morssink), 31 May-3 June 2005, ESTEC, Noordwijk, The Netherlands.

Gan, W. W., and Pellegrino, S. (2005). Kinematic bifurcations of closed-loop deployable frames. Computation of Shell and Spatial Structures, June 1-4, 2005, Salzburg, Austria. (pdf)

Jensen, F., and Pellegrino, S. (2005). Expandable "blob" structures. Journal of the International Association for Shell and Spatial Structures, 46, 151-158. (pdf)

Kueh, A., Soykasap, O., and Pellegrino, S. (2005). Thermo-mechanical behaviour of single-ply triaxial weave carbon fibre reinforced plastic. In: European Conference on Spacecraft Structures, Materials and Testing 2005, 9-13 May 2005 (edited by J. Rocks and K. Fletcher), Noordwijk, The Netherlands, ESA SP-581.

Pagitz, M., Xu, Y., and Pellegrino, S. (2005). Buckling of pumpkin balloons. Computation of Shell and Spatial Structures, June 1-4, 2005 (edited by E. Ramm, W.A. Wall, K.U. Bletzinger, M. Bischoff), Salzburg, Austria.

Papa, A., and Pellegrino, S. (2005). Mechanics of systematically creased thin-film membrane structures. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 18-21 April 2005, Austin, TX, AIAA 2005-1975.

Pellegrino, S. (2005). Bistable shell structures. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 18-21 April 2005, Austin, TX, AIAA 2005-1934.

Plante, J.-S., Santer, M. J., Dubowsky, S., and Pellegrino, S. (2005). Compliant bistable dielectric elastomer actuators for binary mechatronic systems. Proceedings of IDECT/CIE 2005: ASME Mechanism and Robotics Conference,24-28 Aeptember 2005, Long Beach, CA.

Santer, M. J., and Pellegrino, S. (2005). Asymmetrically-bistable tetrahedra. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 18-21 April 2005, Austin, TX, AIAA 2005-2104.

Soykasap, O., Watt, A. M., and Pellegrino, S. (2005). New concept for ultra-thin deployable structures.  Journal of the International Association for Shell and Spatial Structures, 46 (147), 3-8.

Soykasap, O., Watt, A. M., Pellegrino, S., and Howard, P. (2005). Novel concept for all-composite deployable SAR reflectors. European Conference on Spacecraft Structures, Materials and Testing, 9-13 May 2005, ESA Estec.

Soykasap, O., Watt, A. M., Pellegrino, S., and Howard, P. (2005). Novel concept for deployable antenna reflectors. 28th ESA Antenna Workshop on Space Antenna Systems and Technologies, 31 May-3 June 2005 (edited by N. Morssink), ESTEC, Noordwijk, The Netherlands.

Tan, L. T., Soykasap, O., and Pellegrino, S. (2005). Design & manufacture of stiffened spring-back reflector demonstrator. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 18-21 April 2005, Austin, AIAA 2005-2048.

Wong, Y. W., and Pellegrino, S. (2005). Wrinkles in square membranes. In; Textile Composites and Inflatable Structures, (edited by E. Onate and B. Kroplin) Springer, Dordrecht, 109-122.

Ye, H., and Pellegrino, S. (2005). Bi-stable cylindrical space frames. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 18-21 April 2005, Austin, TX, AIAA 2005-1870 (pdf).

Yee, J. C. H., and Pellegrino, S.(2005). Biaxial bending failure locus for woven-thin-ply carbon fibre reinforced plastic structures. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference,18-21 April 2005, Austin, TX, AIAA 2005-1811.

Yee, J. C. H., and Pellegrino, S. (2005). Composite tube hinges. Journal of Aerospace Engineering, 18(October), 224-231.(pdf)

Yee, J. C. H., and Pellegrino, S. (2005). Folding of woven composite structures. Composites Part A, 36(2), 273-278. (pdf)

2004

Buhl, T., Jensen, F.V. and Pellegrino, S. (2004). Shape optimization of cover plates for retractable roof structures. Computers & Structures 82(15-16), 1227-1236. (pdf)

Kebadze, E., Guest, S. D. and Pellegrino, S. (2004). Bistable prestressed shell structures. International Journal of Solids and Structures 41, 2801-2820.(pdf)

Murphey, T.W. and Pellegrino, S. (2004). A novel actuated composite tape-spring for deployable structures. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 19-22 April 2004, Palm Springs, CA AIAA 2004-1528. (pdf)

Santer, M.J. and Pellegrino, S. (2004). An asymmetrically-bistable monolithic energy-storing structure. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 19-22 April 2004, Palm Springs, CA AIAA 2004-1527. (pdf)

Schioler, T. and Pellegrino, S. (2004). Multi-configuration space frames. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 19-22 April 2004, Palm Springs, CA AIAA 2004-1529. (pdf)

Soykasap, Ö. and Pellegrino, S. (2004). Deployable synthetic aperture radar reflector. Department of Engineering, University of Cambridge, Report CUED/D-STRUCT/TR209.  (pdf)

Soykasap, O., Watt, A.M. and Pellegrino, S. (2004). New deployable reflector concept. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 19-22 April 2004, Palm Springs, CA AIAA 2004-1574. (pdf)

Tan, L.T. and Pellegrino, S. (2004). Ultra thin deployable reflector antennas. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 19-22 April 2004, Palm Springs, CA AIAA 2004-1730. (pdf)

Tibbalds, B., Guest, S. D. and Pellegrino, S. (2004). Inextensional packaging of thin shell slit reflectors. Technische Mechanik, 24(3-4), 211-220.(pdf)

Watt, A. M. and Pellegrino, S. (2004). Rigid Deployable Solar Array. Department of Engineering, University of Cambridge, Report CUED/D-STRUCT/TR214. (pdf)

Yee, J.C.H., Soykasap, O. and Pellegrino, S. (2004). Carbon fibre reinforced plastic tape springs. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 19-22 April 2004, Palm Springs, CA AIAA 2004-1819. (pdf)

2003

Baier, H., Datashvili, L., Nathrath, N., and Pellegrino, S. (2003). Technical assessment of high accuracy large space borne reflector antennas. Munich, Institute of Lightweight Structures, Technical University of Munich, pp 70.

Gan, W. W. and Pellegrino, S. (2003). Closed-loop deployable structures.  In Proc. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and  Materials Conference, 7-10 April 2003, Norfolk, VA AIAA 2003-1450. (pdf)

Kukathasan, S. and Pellegrino, S. (2003). Nonlinear vibration of wrinkled membranes. In Proc. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 7-10 April 2003, Norfolk, VA AIAA 2003-1747. (pdf)

Ong, P. P. A. and Pellegrino, S. (2003). Modelling of seabed interaction in frequency domain analysis of mooring cables. In Proc. 22nd International Conference on Offshore Mechanics and Arctic Engineering, June 8-13, Cancun, Mexico, ASME. (pdf)

Ong, P. P. A. and Pellegrino, S. (2003). Modelling of touchdown behaviour of catenary morrings in frequency domain. 5th International Symposium on Cable Dynamics, 15-18 September 2003, Santa Margherita, Italy.

Soykasap, O., Watt, A. M., and Pellegrino, S. (2003). Ultra-high performance deployable structures. 5th Asia Pacific Structural Engineering and Construction Conference, 26-28 August 2003, Johor Bahru, Malaysia, Department of Structures and Materials, Universiti Teknologi Malaysia.

Tibert, A. G. and Pellegrino, S. (2003). Deployable tensegrity masts. In Proc. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 7-10 April 2003, Norfolk, VA AIAA 2003-1978. (pdf)

Tibert, G. and Pellegrino, S. (2003). Review of form-finding methods for tensegrity structures. International Journal of Space Structures, 18(4), 209-223. (pdf)

Wong, Y. W., and Pellegrino, S. (2003). Wrinkled membranes. In: Textile Composites and Inflatable Structures (edited by E. Onate and B. Kroplin) CIMNE, Barcelona. (pdf)

Wong, Y. W., Pellegrino, S. and Park, K. C. (2003). Prediction of wrinkle amplitudes in square solar sails. In Proc. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 7-10 April 2003, Norfolk, VA AIAA 2003-1982. (pdf)

Yee, J. C. H. and Pellegrino, S. (2003). Foldable composite structures. In Proc. IASS-APCS 2003, 22-26 October 2003, Taipei, Taiwan (Edited by C. S. Chen), IASS. (pdf)

2002

Drew, H. R. and Pellegrino, S. (2002). New approaches to structural mechanics, shells and biological structures. Dordrecht, Kluwer Academic Publishers.

Jensen, F. and Pellegrino, S. (2002). Expandable structures formed by hinged plates. In Proc. Fifth International Conference on Space Structures, 19-21 August, 2002, Guildford, Surrey (Edited by G. A. R. Parke and P. Disney), Thomas Telford Limited. (pdf)

Kukathasan, S. and Pellegrino, S. (2002). Vibration of Prestressed Membrane Structures in Air. In Proc. 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 22-25 April 2002, Denver, CO, AIAA 2002-1368. (pdf)

Ong, P. P. A., and Pellegrino, S., and Cheng, X. M. (2002). Improved approximation of extreme tensions for frequency domain analysis of mooring cables. 7th IBC Deepwater Risers, Moorings and Anchorings, 16-17 October 2002, London.

Pellegrino, S. (2002). CRTS reflectors. In Proc. 25th ESA Antenna Workshop on Satellite Antenna Technology, 18-20 September 2002, ESTEC, Noordwijk, The Netherlands. (pdf)

Pellegrino, S. (2002). Deployable membrane reflectors. In Proc. 2nd World Engineering Congress, 22-25 July, 2002, Sarawak, Malaysia pp 1-9. (pdf)

Pellegrino, S., Kebadze, E., Lefort, T. and Watt, A.M. (2002). Low-cost hinge for deployable structures. Department of Engineering, University of Cambridge, Report CUED/D-STRUCT/TR202. (pdf)

Tan, L. T. and Pellegrino, S. (2002). Stiffness design of spring back reflectors. In Proc. 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 22-25 April 2002, Denver, CO, AIAA 2002-1498. (pdf)

Tan, L. T. and Pellegrino, S. (2002). Stiffened Springback reflectors. In Proc. 25th ESA Antenna Workshop on Satellite Antenna Technology, 18-20 September 2002, ESTEC, Noordwijk, The Netherlands. (pdf)

Tibert, G. and Pellegrino, S. (2002). Deployable tensegrity reflectors for small satellites. Journal of Spacecraft and Rockets, 39(5), 701-709. (pdf)

Watt, A.M. and Pellegrino, S. (2002). Tape-spring rolling hinges. In Proc. 36th Aerospace Mechanisms Symposium May 15-17, 2002, Glenn Research Center (2002) (pdf)

Wong, Y. W. and Pellegrino, S. (2002). Computation of wrinkle amplitudes in thin membranes. In Proc. 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 22-25 April 2002, Denver, CO, AIAA 2002-1369. (pdf)

Wong, Y. W. and Pellegrino, S. (2002). Amplitude of wrinkles in thin membranes. New Approaches to Structural Mechanics, Shells and Biological Structures, (Edited by H. Drew and S. Pellegrino), pp 257-270, Kluwer Academic Publishers. (pdf)

2001

Dietrich, R. and Pellegrino, S. (2001). Feasibility study of a deployable mesh reflector: Phase II. Technical Report CUED/D-STRUCT/TR199, Department of Engineering, University of Cambridge.

Jensen, F. and Pellegrino, S. (2001). Arm development: review of existing technologies. Department of Engineering, University of Cambridge, Report CUED/D-STRUCT/TR198 (pdf)

Kukathasan, S. and Pellegrino, S. (2001). Vibration of Prestressed Membrane Reflectors. Technical report CUED/D-STRUCT/TR194, Department of Engineering, University of Cambridge. (pdf)

Lai, C.-Y. and Pellegrino, S. (2001). Umbrella-type furlable reflector based on tension-truss concept. In Proc. 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 16-19 April 2001, Seattle WA AIAA 2001-1481.

Lai, C. Y. and Pellegrino, S. (2001). Design and testing of a 1.5 m offset CRTS reflector demonstrator. Technical Report CUED/D-STRUCT/TR193, Department of Engineering, University of Cambridge. (pdf)

Lai, C. Y. and Pellegrino, S. (2001). Non-linear finite element analysis of CRTS reflectors. Technical Report CUED/D-STRUCT/TR192 Department of Engineering, University of Cambridge. (pdf)

Pellegrino, S. (2001). Collapsible Rib-Tensioned Surface (CRTS) Technology Development: Final Report. Technical Report CUED/D-STRUCT/TR195 Department of Engineering, University of Cambridge. (pdf)

Pellegrino, S. (2001). Deployable Structures, Springer Verlag, Wien-New York.

Tibert, G. and Pellegrino, S. (2001). Furlable reflector concept for small satellites. In Proc. 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 16-19 April 2001, Seattle WA AIAA 2001-1261. (pdf)

2000

Fischer, A. and Pellegrino, S. (2000). Interaction between gravity compensation system and deployable structure. Journal of Spacecraft and Rockets, 36 (pdf).

Iqbal, K. and Pellegrino, S. (2000). Bi-stable composite shells. In Proc. 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, 3-6 April 2000, Atlanta, GA, AIAA-2000-1385. (pdf)

Iqbal, K., Pellegrino, S. and Daton-Lovett, A. (2000). Bi-stable composite slit tubes. In Proc. IUTAM-IASS Symposium on Deployable Structures (edited by S. Pellegrino and S.D. Guest), 6-9 September, 1998 Cambridge, Kluwer. (pdf)

Kumar, P. and Pellegrino, S. (2000). Kinematic bifurcations in the simulation of deployable structures. In Proc. IASS-IACM 2000 Fourth International Colloquium on Computation of Shell and Spatial Structures, 5-7 June 2000, Chania, Crete. (pdf)

Kumar, P. and Pellegrino, S. (2000). Computation of kinematic paths and bifurcation points. International Journal of Solids and Structures, W.T. Koiter Commemorative Issue, 37(46-47), 7003-7027.

Lai, C. Y. and Pellegrino, S. (2000). Feasibility study of a deployable mesh reflector. Technical Report CUED/D-STRUCT/TR186, Department of Engineering, University of Cambridge.

Lennon, B. A. and Pellegrino, S. (2000). Stability of lobed inflatable structures. In Proc. 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, 3-6 April 2000, Atlanta, GA, AIAA-2000-1728. (pdf)

Pellegrino, S. Green, C., Guest, S.D. and Watt A. (2000). SAR Advanced Deployable Structure. Technical Report CUED/D-STRUCT/TR191, Department of Engineering, University of Cambridge. (pdf)

Pellegrino, S., and Guest, S. D. (2000). IUTAM-IASS Symposium on Deployable Structures: Theory and Applications, Kluwer Academic Publishers, Dordrecht.

Pellegrino, S. Kukathasan, S., Tibert, G. and Watt, A. (2000). Small Satellite Deployment Mechanisms. Technical Report CUED/D-STRUCT/TR190, Department of Engineering, University of Cambridge. (pdf)

Schulz, M. and Pellegrino, S. (2000). Equilibrium paths of mechanical systems with unilateral constraints. Part 1: Theory. Proceedings of the Royal Society of London Series A, 456, 2223-2242. (pdf)

Schulz, M. and Pellegrino, S. (2000). Equilibrium paths of mechanical systems with unilateral constraints. Part 2: Deployable reflector. Proceedings of the Royal Society of London Series A, 456, 2223-2242. (pdf)

Seffen, K. A., You, Z. and Pellegrino, Z. (2000). Folding and deployment of curved tape springs. International Journal of Mechanical Sciences, 42(10), 2055-2073.

Seffen, K. A., Pellegrino, S. and Parks, G. T. (2000). Deployment of a panel by tape-spring hinges. In Proc. IUTAM-IASS Symposium on Deployable Structures: Theory and Applications (edited by S. Pellegrino and S.D. Guest) 6-9 September 1998, Cambridge, U.K. Kluwer.

Tan, L. T. and Pellegrino, S. (2000). Stiffening method for "spring-back" reflectors. In Proc. IASS-IACM 2000 Fourth International Colloquium on Computation of Shell and Spatial Structures, 5-7 June 2000, Chania, Crete. (pdf)

1999

Darby, A. P. and Pellegrino, S. (1999). Modeling and control of a flexible structure incorporating inertial stick-slip actuators. Journal of Guidance, Control, and Dynamics, 22, 36-43.

Kangwai, R., Guest, S. D. and Pellegrino, S. (1999). An introduction to the analysis of symmetric structures. Computers & Structures, 71, 671-688.

Kassabian, P. E., You, Z. and Pellegrino, S. (1999). Retractable roof structures. Proceedings of the Institution of Civil Engineers Structures and Buildings & Bldgs, 134, 45-56.(pdf)

Lai, C. Y. and Pellegrino, S. (1999). Deployable membrane reflectors with offset configuration. In Proc. AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, St Louis AIAA-99-1477.

Lai, C. Y. and Pellegrino, S. (1999). Shape and stress analysis of offset CRTS reflectors. CUED/D-STRUCT/TR177 Department of Engineering, University of Cambridge. (pdf)

Pellegrino, S. (1999). An introduction to deployable structures. In Proc. Textile Roofs '99: Fourth International Workshop on the Design and Practical Realisation of Architectural Membrane Structures, 17-19 June 1999, Technical University of Berlin (Edited by L. Grundig)

Seffen, K. A. and Pellegrino, S. (1999). Deployment dynamics of tape springs. Proceedings of the Royal Society of London, series A, 455, 1003-1048.

1998

Fischer, A. and Pellegrino, S. (1998). Interaction between gravity compensation system and deployable structure. In Proc. 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 20-23 April, 1998 Long Beach, CA pp 1183-1192, AIAA-98-1835.

Lai, C. Y., You, Z. and Pellegrino, S. (1998). Shape of deployable membrane reflectors. ASCE Journal of Aerospace Engineering, 11, 73-80.

Lai, C. Y., You, Z. and Pellegrino, S. (1998). High precision shaping of deployable membrane reflectors. In Proc. SPACE98, April 26-30, 1998, Albuquerque, New Mexico (Edited by R. G. Galloway and S. Lokaj), pp 46-52, ASCE.

Pellegrino, S. (1998). Deployable Structures. In Proc. Current and Emerging Technologies of Shell and Spatial Structures, 28-30 April 1997, Madrid (Edited by J. Abel, R. Astudillo and N. K. Srivastava), pp 175-188, IASS.

Pellegrino, S. and Miura, K. (1998). Deployable structures: from spacecraft to buildings. In Proc. Engineering a New Architecture, 26-28 May, 1998 Aarhus School of Architecture, Denmark (Edited by P. Dombernowsky and T. Wester), pp 61-70, Aarhus School of Architecture

Schulz, M. and Pellegrino, S. (1998). 'Multi-path" motion of deployable structures. Proceedings of Fourth World Congress on Computational Mechanics, 29 June-2 July, Buenos Aires (Edited by S. R. Idelsohn, E. Onate and E. N. Dvorkin), CIMNE, Barcelona. (pdf)

Tibbalds, B., Guest, S. D. and Pellegrino, S. (1998). Folding concept for flexible surface reflectors. In Proc. 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 20-23 April, 1998 Long Beach, CA pp 1193-1201. AIAA-98-1836.

1997

Darby, A. P. and Pellegrino, S. (1997). Active alignment control of a payload using non-linear, long-stroke actuators. In Proc. IUTAM Symposium on Interaction between Dynamics and Control in Advanced Mechanical Systems, 21-26 April, 1996, Eindhoven University of Technology (Edited by D. H. v. Campen), pp 91-100, Kluwer Academic Publishers, Dordrecht.

Darby, A. P. and Pellegrino, S. (1997). Inertial stick-slip actuator for active control of shape and vibration. Journal of Intelligent Materials Systems and Structures, Journal of Intelligent Materials Systems and Structures, 8(12), 1001-1011.

Huang, W. and Pellegrino, S. (1997). Nitinol actuators for deployable space structures. In Proc. International Conference on Shape Memory and Superelastic Technologies, 2-6 March 1997, Pacific Grove, CA (Edited by A. Pelton).

Kassabian, P. E., You, Z. and Pellegrino, S. (1997). Retractable structures based on multi-angulated elements. In Proc. International Colloquium on Structural Morphology, Nottingham, U.K. (Edited by J. C. Chilton).

Lai, C.-Y., You, Z. and Pellegrino, S. (1997). Shape and stress analysis of symmetric CRTS reflectors. Technical Report CUED/D-STRUCT/TR170 Department of Engineering, University of Cambridge. (pdf)

Seffen, K. A. and Pellegrino, S. (1997). Deployment of a rigid panel by tape-springs. Technical Report CUED/D-STRUCT/TR168 Department of Engineering, University of Cambridge. (pdf)

Seffen, K. A., You, Z. and Pellegrino, S. (1997). Folding and deployment of curved springs. Technical Report CUED/D-STRUCT/TR171 Department of Engineering, University of Cambridge.

Tan, G. E. B. and Pellegrino, S. (1997). Non-linear dynamic identification: an application to prestressed cable structures. Journal of Sound and Vibration, 208 (1),33-45.

You, Z. and Pellegrino, S. (1997). Cable-stiffened pantographic deployable structures. Part 2: Mesh Reflector. AIAA Journal, 35, 1348-1355.

You, Z. and Pellegrino, S. (1997). Foldable bar structures. International Journal of Solids and Structures, 34, 1825-1847.

1996

Guest, S. D. and Pellegrino, S. (1996). Design optimization of a solid surface deployable reflector. In Proc. IUTAM Symposium on Optimization of Mechanical Systems, 26-31 March 1996, Stuttgart, Germany (Edited by D. Bestle and W. Schielen), 105-112. Kluwer Academic Publishers, Dordrecht.

Guest, S. D. and Pellegrino, S. (1996). The folding of triangulated cylinders, Part III: Experiments. ASME Journal of Applied Mechanics, 63, 77-83.(pdf)

Guest, S. D. and Pellegrino, S. (1996). A new concept for solid surface deployable antennas. Acta Astronautica, 38, 103-113. (pdf)

Huang, W. and Pellegrino, S. (1996). Shape-memory alloy actuators for deployable structures: Phase I. Cambridge University Engineering Department CUED/D-STRUCT/TR163.

Huang, W., Pellegrino, S. and Bashford, D. P. (1996). Shape-memory alloy actuators for deployable structures. In Proc. Spacecraft Structures, Materials, and Mechanical Testing, 27-29 March 1996, Noordwijk pp 53-61. ESA SP-386.

Kawaguchi, K., Hangai, Y., Pellegrino, S. and Furuya, H. (1996). Shape and stress control analysis of prestressed truss structures. Journal of Reinforced Plastics and Composites, 15, 1226-1236.

King, S. A. and Pellegrino, S. (1996). Parametric excitation and dynamic instabilities in thin-walled deployable booms. In Proc. Spacecraft Structures, Materials, and Mechanical Testing, 27-29 March 1996, Noordwijk pp 1153-1160. ESA SP-386.

Kumar, P. and Pellegrino, S. (1996). Deployment and retraction of a cable-driven rigid panel solar array. Journal of Spacecraft and Rockets, 33, 836-842.

Tan, G. E. B. and Pellegrino, S. (1996). Non-linear dynamic identification: an application to prestressed cable systems. In Proc. Structural Dynamics Eurodyn'96, 5-8 June 1996 Florence (Edited by G. Augusti, C. Borri and P. Spinelli), pp 941-948, Balkema, Rotterdam.

You, Z. and Pellegrino, S. (1996). Cable-stiffened pantographic deployable structures. Part 1: Triangular Mast. AIAA Journal, 34, 813-820.

You, Z. and Pellegrino, S. (1996). New solutions for foldable roof structures. In Proc. Mobile and Rapidly Assembled Structures II, 17-19 June, Seville (Edited by F. Escrig and C. A. Brebbia), pp 35-44, Computational Mechanics Publications.

1995

Guest, S. D. and Pellegrino, S. (1995). Development of a new solid surface deployable antenna. In Proc. ESA Workshop on Antenna Technologies, 21-23 November 1995, ESTEC, Noordwijk pp 6.3.1-6.3.11. ESA-WPP-100.

Kumar, P. and Pellegrino, S. (1995). Deployment and retraction of cable-driven rigid panel solar arrays. In Proc. 36th SDM Conference, 10-12 April 1995, New Orleans pp 1724-1733, AIAA 95-1367.

Kumar, P. and Pellegrino, S. (1995). Deployment and retraction of a cable-driven solar array: testing and simulation. In Proc. 29th Aerospace Mechanisms Symposium, 17-19 May 1995, NASA Johnson Space Center, Houston (Edited by W. C. Schneider), pp 253-267. NASA CP-3293.

Pellegrino, S. (1995). Adaptive shape control of mesh reflectors. In Proc. ESA Workshop on Antenna Technologies, 21-23 November 1995, ESTEC, Noordwijk pp 3.1.1-3.1.9, ESA-WPP-100.

Pellegrino, S. (1995). Large retractable appendages in spacecraft. Journal of Spacecraft and Rockets, 32, 1006-1014.

You, Z. and Pellegrino, S. (1995). Structural concept of a deployable mesh reflector. In Proc. ESA Workshop on Antenna Technologies, 21-23 November 1995, ESTEC, Noordwijk pp 6.2.1-6.2.14. ESA-WPP-100.

1994

Guest, S. D. and Pellegrino, S. (1994). The folding of triangulated cylinders, Part I: geometric considerations. ASME Journal of Applied Mechanics, 61, 773-777.(pdf)

Guest, S. D. and Pellegrino, S. (1994). The folding of triangulated cylinders, Part II: the folding process. ASME Journal of Applied Mechanics, 61, 778-783.(pdf)

Kawaguchi, K., Furuya, H. and Pellegrino, S. (1994). Shape and stress control of prestressed truss structures. Technical Report CUED/D-STRUCT/TR145 Cambridge University Engineering Department.

Kawaguchi, K., Pellegrino, S., Furuya, H. and Hangai, Y. (1994). Shape and stress control analysis of prestressed truss structures. In Proc. 5th International Conference on Adaptive Structures, 5-7 December, Sendai, Japan (Edited by J. Tani, E. J. Breitbach, B. K. Wada, M. Uchiyama and S. Chonan), pp 184-193, Technomic Publishers.

Kwan, A. S. K. and Pellegrino, S. (1994). Design and performance of the Octahedral Deployable Space Antenna (ODESA). International Journal of Space Structures, 9, 163-173.

Kwan, A. S. K. and Pellegrino, S. (1994). Matrix formulation of macro-elements for deployable structures. Computers and Structures, 50, 237-254.

Kwan, A. S. K. and Pellegrino, S. (1994). A new concept for large deployable space frames. International Journal of Space Structures, 9, 153-162.

You, Z. and Pellegrino, S. (1994). Deployable mesh reflector. In Spatial, Lattice and Tension Structures. (Proceedings of IASS-ASCE Symposium held in Atlanta, April 1994), (Edited by J. F. Abel, J. W. Leonard and C. U. Penalba), pp 103-112, ASCE, New York.

You, Z. and Pellegrino, S. (1994). Dynamic deployment of the CRTS reflector. In Proc. 35th Structures, Structural Dynamics and Materials Conference, 18-20 April 1994, Hilton Head, SC pp 1497-1505, AIAA Paper 94-1504.

You, Z. and Pellegrino, S. (1994). Study of the folding and deployment aspects of a Collapsible Rib Tensioned Surface (CRTS) Antenna reflector. Technical Report CUED/D-STRUCT/TR144, Department of Engineering, University of Cambridge. (pdf)

1993

Kwan, A. S. K. and Pellegrino, S. (1993). Design and performance of the Octahedral Deployable Mast. In Space Structures 4, Proceedings of Fourth International Conference on Space Structures, Guildford, 6-10 September 1993, (Edited by G. A. R. Parke and C. M. Howard), 843-852, Thomas Telford, London.

Kwan, A. S. K. and Pellegrino, S. (1993). Prestressing a space structure. AIAA Journal, 31, 1961-1963.

Kwan, A. S. K., You, Z. and Pellegrino, S. (1993). Active and passive cable elements in deployable masts. International Journal of Space Structures, 8, 29-40.

Lipscombe, P. R. and Pellegrino, S. (1993). Free rocking of prismatic blocks. ASCE Journal of Engineering Mechanics, 119(No. 7, July), 1387-1410. (pdf)

Pellegrino, S. (1993). Special Issue on Deployable Space Structures. International Journal of Space Structures, vol. 8..

Pellegrino, S. (1993). Structural computations with the Singular Value Decomposition of the equilibrium matrix. International Journal of Solids and Structures, 30, 3025-3035.(pdf)

Pellegrino, S. and You, Z. (1993). Foldable ring structures. In Space Structures 4. Proceedings of Fourth International Conference on Space Structures, Guildford, 6-10 September 1993, (Edited by G. A. R. Parke and C. M. Howard), 783-792, Thomas Telford, London.

1992

Calladine, C. R. and Pellegrino, S. (1992). Further remarks on first-order infinitesimal mechanisms. International Journal of Solids and Structures, 29, 2119-2122.(pdf)

Guest, S. D. and Pellegrino, S. (1992). Inextensional wrapping of flat membranes. In Proc. First International Seminar on Structural Morphology, Montpellier, La Grand Motte, 7-11 September 1992 (Edited by R. Motro and T. Wester), 203-215, LMGC, Universite Montpellier II.

Pellegrino, S. (1992). A class of Tensegrity domes. International Journal of Space Structures, 7, 127-142.

1991

Calladine, C. R. and Pellegrino, S. (1991). First-order infinitesimal mechanisms. International Journal of Solids and Structures, 27, 505-515.

Kwan, A. S. K. and Pellegrino, S. (1991). The Pantographic Deployable Mast: design, structural performance and deployment tests. In Rapidly Assembled Structures, (Edited by P. S. Bulson), 213-224, Computational Mechanics Publications.

Palombini, F. and Pellegrino, S. (1991). Parameter estimation in experimental modal analysis: comparison of existing techniques and application to a deployable mast. Technical Report CUED/D-STRUCT/TR139, Department of Engineering, University of Cambridge.

Pellegrino, S. (1991). Active and passive cable elements in deployable masts. In Proc. 42nd IAF Congress, Montreal, Paper IAF-91-313.

Pellegrino, S. and C. R. Calladine (1991). Structural computation of an assembly of rigid links, frictionless joints and elastic springs. Journal of Applied Mechanics, 113 (September), 749-753.

1990

Kwan, A. S. K. and Pellegrino, S. (1990). A cable-rigidised 3D pantograph. In Proc. Fourth European Space Mechanisms & Tribology Symposium, Cannes, 149-154. ESA ESA-SP-299.

Pellegrino, S. (1990). Analysis of prestressed mechanisms. International Journal of Solids and Structures, 26, 1329-1350.

Pellegrino, S. and T. F. van Heerden (1990). Solution of equilibrium equations in the Force Method: a compact band method for underdetermined linear systems. Computers & Structures, 37(5), 743-751.

1989

Calladine, C. R. and S. Pellegrino (1989). Discussion of: Characteristics of cable nets, by O. Vilnay. ASCE Journal of Structural Engineering 115(7), 747-748.

Kwan, A. S. K. and Pellegrino, S. (1989). A new deployable mast. In Proc. Canadian Congress Applied Mechanics, Ottawa (Edited by M. A. Erki and J. Kirkhope), 334-335.

Lipscombe, P. R. and S. Pellegrino (1989). Rocking of rigid block systems under dynamic loads. Applied Solid Mechanics 3 (edited by I. M. Allison and C. Ruiz), Elsevier Applied Science Publishers, 175-189.

1988

Pellegrino, S. (1988). On the rigidity of triangulated hyperbolic paraboloids. Proceedings of Royal Society of London A 418, 425-452.

Pellegrino, S. (1988). Efficient upper-bound limit analysis. International Journal of Mechanical Sciences 30(7), 455-474.

1987

Pellegrino, S. (1987). Upper bound plastic collapse analysis of frameworks. Computational Plasticity, (edited by D. R. J. Owen, E. Hinton and E. Onate). Swansea, Pineridge Press, 589-604.

1986

Pellegrino, S. (1986). Mechanics of kinematically indeterminate structures, Ph.D. Dissertation, University of Cambridge, U.K (pdf).

Pellegrino, S. and C. R. Calladine (1986). Matrix analysis of statically and kinematically indeterminate frameworks. International Journal of Solids and Structures, 22, 409-428 (pdf).

1985

1984

Pellegrino, S. and C. R. Calladine (1984). Two-step matrix analysis of pre-stressed cable nets. III International Conference on Space Structures, Guildford, U.K., Elsevier Applied Science Publishers (pdf).